# Brew Turn Removal

**URL:** <https://community.breww.com/t/brew-turn-removal/5202>\
**Category:** Help & advice\
**Tags:** production\
**Created:** [14 November 2024 21:10 UTC](https://community.breww.com/t/brew-turn-removal/5202 "2024-11-14T21:10:17Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![tony-dastolfo](https://community.breww.com/letter_avatar_proxy/v4/letter/t/22d042/32.png) [@tony-dastolfo](https://community.breww.com/u/tony-dastolfo)\
**Post date:** [14 November 2024 21:10 UTC](https://community.breww.com/t/brew-turn-removal/5202/1 "2024-11-14T21:10:17Z")

</div>

Hello,  
Just getting Breww set up and ran our first brew through it. I set up this batch for two turns, but we changed our minds and only did one. Any help with how to remove/delete the second turn would be really appreciated.

Thanks,  
Tony

---

<div class="post-metadata">

**Author:** ![steve-neal](https://community.breww.com/user_avatar/community.breww.com/steve-neal/32/327_2.png) [@steve-neal](https://community.breww.com/u/steve-neal)\
**Post date:** [15 November 2024 08:35 UTC](https://community.breww.com/t/brew-turn-removal/5202/2 "2024-11-15T08:35:05Z")

</div>

AFAIK you can’t without “undoing” the batch & starting again.

I’d just remove any auto-assigned ingredients from Turn 2 (if there are any) and add a note to the batch explaining this rather than undoing everything.

---

<div class="post-metadata">

**Author:** ![connor-fry](https://community.breww.com/user_avatar/community.breww.com/connor-fry/32/1365_2.png) [@connor-fry](https://community.breww.com/u/connor-fry)\
**Post date:** [15 November 2024 16:09 UTC](https://community.breww.com/t/brew-turn-removal/5202/3 "2024-11-15T16:09:23Z")

</div>

Hi Tony,

Thank you for raising in the community!

@steve-neal is absolutely correct. Currently, you would need to reverse the entire batch back to a planned batch and adjust it to a single-turn batch if you wanted to cancel the second turn. That said, I’d recommend following Steve’s suggestion: process turn 2 for a very small volume, such as 1 litre, unassign any ingredients auto-allocated to turn 2, and then waste the additional small volume.

I hope this helps but let us know if you need any more support at all.

---

<div class="post-metadata">

**Author:** ![steve-neal](https://community.breww.com/user_avatar/community.breww.com/steve-neal/32/327_2.png) [@steve-neal](https://community.breww.com/u/steve-neal)\
**Post date:** [16 November 2024 08:09 UTC](https://community.breww.com/t/brew-turn-removal/5202/4 "2024-11-16T08:09:56Z")

</div>

Semi-related @connor-fry - can you not transfer a zero volume turn? (I’ve never tried), this would cover closing this out as above, but also the potential scenario where you dump a batch from brewhouse?

---

<div class="post-metadata">

**Author:** ![ben-collard](https://community.breww.com/user_avatar/community.breww.com/ben-collard/32/1560_2.png) [@ben-collard](https://community.breww.com/u/ben-collard)\
**Post date:** [18 November 2024 17:03 UTC](https://community.breww.com/t/brew-turn-removal/5202/5 "2024-11-18T17:03:38Z")

</div>

Hi Steve, thanks for your reply. When transferring a turn from the brewing system, the volume must be greater than ‘0’; therefore, a small volume will need to be transferred for the second turn. Let me know if you need any more help. Cheers!